loading
reading
writing
saving
searching
Leviton Decora Humidity Sensor & Fan Control Switch, 1/4 HP, Ivory DHS05-1LI - $20 (Emmaus)
QR Code Link to This Post
Color: Ivory
Leviton's DHS05-1LI Decora Humidity Sensor Switch and Fan Control detects excess humidity in a room and automatically activates an exhaust or ventilation fan helping to reduce condensation and provide a more comfortable environment. The sensor uses state-of-the-art digital sensing technology to continuously monitor and manage moisture levels in areas of the home prone to humidity like bathrooms, basements, laundry rooms and spas. Replaces an existing switch and can be used with most bathroom or ventilation fans or fan/light combinations. Easy DIY install with slim depth for an easier fit in the wallbox, interchangeable line and load wires to help prevent miswiring, and a green flex sleeve that connects to ground or neutral when the sleeve is removed. User-friendly customization to adjust sensitivity, humidity level and time out settings and easy color change using the DHKIT faceplates available in white, ivory, light almond, gray, black and brown. Use with Decora Wallplate and Decora Plus Screwless Wallplate sold separately.
Replaces a single pole switch for control of a ventilation fan or fan/light combination, or a combination switch for separate control of fan and lighting
1/4 HP Motor, 300W LED/CFL, 600W Incandescent/Halogen, 400VA Magnetic Low Voltage, 400VA Electronic Low Voltage
Shallow design easily fits in the wallbox and lead terminal wires for easier installation without having to bend wires around terminal screws
Innovative Green Flex Sleeve wires to ground in homes with no neutral wiring or remove the sleeve and connect to a neutral wire if present in the wallbox . A ground wire is required for installation
DIY friendly with two black wires that can interchanged between line and load to help prevent miswiring
Microprocessor control with digital sensing technology
Zero Cross turn-on technology extends the life of switching relays
Advanced sensing enhances detection when the room is occupied and minimizes false triggers when unoccupied
Operating Modes for bath fan, air cycle and humidistat
Meets CALGREEN, California Title 24 and ASHRAE 62.2 requirements; sensor is equipped with user adjustable humidity range set points to set the minimum humidity level at which the fan will automatically operate
Automatic ventilation/air cycle mode for continuous operation with hourly pre-set time outs
Test mode to help determine proper sensor placement and setting adjustments that need to be made for optimal operation
Compatible with Decora and Decora Plus wallplates (sold separately)
Change color with DHKIT faceplates available in white, ivory, light almond, gray, black and brown (sold separately)